The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil.
John Deere 4240 Oil Capacity and Type
| Engine Oil Capacity | 17 qt / 16.1 L |
| Recommended Oil Name | John Deere Plus-50 II |
| Recommended Oil Type | 15W-40 heavy-duty diesel engine oil |
| Cold Weather Oil | 10W-30 diesel engine oil |
| Engine | John Deere 466 ci / 7.6L 6-cylinder diesel |
| Aspiration | Naturally aspirated |
| Cylinders | 6-cylinder diesel |
| Rated RPM | 2200 rpm |
| Oil Change Interval | Every 200 to 250 hours |
How Much Oil Does a John Deere 4240 Take?
The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil.
Use John Deere Plus-50 II 15W-40 or another high-quality diesel-rated 15W-40 engine oil. For colder operating conditions, use a suitable 10W-30 diesel engine oil.
Fill slightly under the listed capacity first, run the engine, let it settle, then check the dipstick and top up to the full mark.
Quick Specs Overview
17 qtEngine Oil
15W-40Diesel Oil
200–250 hrsInterval
110 HPPTO Power
Best Oil to Use
- John Deere Plus-50 II 15W-40 engine oil
- Any quality diesel-rated 15W-40 oil meeting modern diesel specifications
- 10W-30 diesel oil for colder operating conditions
- Replace the engine oil filter at every oil change
Oil Capacity Comparison
Oil Change Intervals
| Engine Oil | Every 200 to 250 hours |
| Engine Oil Filter | Replace every oil change |
| Fuel Filters | Every 500 hours |
| Air Filter | Clean regularly; replace as needed |
Other John Deere 4240 Fluid Capacities
| Engine Oil | 17 qt / 16.1 L |
| Coolant Capacity | 30 qt / 28.4 L |
| Fuel Tank | 46 gal / 174.1 L |
| Hydraulic System | 11 gal / 41.6 L |
| Transmission / Hydraulic Oil | 62 qt / 58.7 L |
| Hydraulic Pump Flow | 23 gpm / 87.1 L/min |
John Deere 4240 Engine Specs
| Engine | John Deere 466 ci diesel |
| Displacement | 466 ci / 7.6 L |
| Cylinders | 6-cylinder |
| Aspiration | Naturally aspirated |
| Compression Ratio | 17.0:1 |
| Rated RPM | 2200 rpm |
| Cooling System | Liquid-cooled |
Common Mistakes
- Using petrol engine oil instead of diesel-rated oil
- Skipping the oil filter replacement
- Overfilling before checking the dipstick
- Confusing engine oil capacity with hydraulic or transmission oil capacity
- Assuming the 4240 has the same coolant capacity as the 4230
Summary
The John Deere 4240 takes 17 quarts / 16.1 litres of engine oil. The best oil choice is John Deere Plus-50 II 15W-40 or another quality diesel-rated 15W-40 engine oil. The 4240 uses a naturally aspirated 466 ci / 7.6L 6-cylinder diesel engine, with 30 quarts of coolant, a 46 gallon fuel tank, and a 62 quart transmission / hydraulic oil capacity.







