The John Deere 4105 is 118 in long, 58 in wide, and 62 in tall.
Length118 in (9 ft 10 in) / 2,997.2 mm
Width58 in (4 ft 10 in) / 1,473.2 mm
Height62 in (5 ft 2 in) / 1,574.8 mm
John Deere 4105 Dimensions
Overall length
118 in (9 ft 10 in) / 2,997.2 mm
Overall width
58 in (4 ft 10 in) / 1,473.2 mm
Overall height
62 in (5 ft 2 in) / 1,574.8 mm
Rear tread width
60.6 in (5 ft 0.6 in) / 1,539.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
118 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
58 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
62 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 4105 Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 4105 is not oversized. With length 118 in (9 ft 10 in) / 2,997.2 mm, width 58 in (4 ft 10 in) / 1,473.2 mm, and height 62 in (5 ft 2 in) / 1,574.8 mm, a good garage, carport or compact shed may be workable.
Fitment note
The John Deere 4105 fitment specs show length at 118 in (9 ft 10 in) / 2,997.2 mm, width at 58 in (4 ft 10 in) / 1,473.2 mm, and height at 62 in (5 ft 2 in) / 1,574.8 mm. That is the practical buyer information for size.
Tread width note
The John Deere 4105 rear wheel tread is 60.6 in (5 ft 0.6 in) / 1,539.2 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the John Deere 4105, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Storage FAQ
Will it fit in a garage?
The tractor itself is 118 in long, 58 in wide, and 62 in tall. For storage, that means the opening should be closer to 7 ft high and 8 ft wide, with about 15 ft of usable depth.
What size door should I check?
The door should be bigger than the tractor by about 10 in of height margin and 16 in of side margin. That puts the target around 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. A loader mainly adds depth and sometimes height; a rear implement adds depth; a mower deck or tire setting can add width beyond the listed 58 in.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 118 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
