The John Deere 4052R tractor hydraulic pump flow is 17.4 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow17.4 GPM
Implement flow17.4 GPM
Total hydraulic flow15.9 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10.2 gal
John Deere 4052R Hydraulic Flow Details
Hydraulic pump flow
17.4 GPM
Implement hydraulic flow
17.4 GPM
Total hydraulic flow
15.9 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
17.4 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
17.4 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
15.9 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10.2 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 4052R Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 4052R is 17.4 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
The John Deere 4052R’s hydraulic pressure is listed at 2,500 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (17.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4052R’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 4052R is 10.2 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
