The John Deere 4050 tractor hydraulic pump flow is 26.5 GPM, and hydraulic system pressure is 2,277 psi.
Hydraulic pump flow26.5 GPM
Implement flow26.5 GPM
Total hydraulic flow26.5 GPM
Hydraulic pressure2,277 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity42 qt (10.5 gal)
John Deere 4050 Hydraulic Flow Details
Hydraulic pump flow
26.5 GPM
Implement hydraulic flow
26.5 GPM
Total hydraulic flow
26.5 GPM
Hydraulic system pressure
2,277 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
42 qt (10.5 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
26.5 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
26.5 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
26.5 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,277 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10.5 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 4050 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 4050’s implement flow figure is about 26.5 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
At 2,277 psi, the John Deere 4050’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (26.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4050’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 4050’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
