The John Deere 4044R takes 2 gal (7.6 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
Coolant capacity2 gal (7.6 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere 4044R Coolant Capacity Specs
Coolant capacity
2 gal (7.6 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
42.5 hp
Engine displacement
2.2 L (134.3 cu in)
John Deere 4044R Coolant Capacity Guide
Coolant capacity guide
This model
2 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 4044R Coolant Service Notes
Coolant capacity note
The John Deere 4044R cooling system is listed at 2 gal (7.6 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
The John Deere 4044R cooling system should be refilled close to 2 gal (7.6 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
Coolant type matters on the John Deere 4044R. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 4044R, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 2 gal (7.6 L) capacity to buy enough coolant for the John Deere 4044R, but finish the job by checking the actual level marks
Engine context
The John Deere 4044R engine specs listed with this page are engine horsepower 42.5 hp and engine displacement 2.2 L (134.3 cu in). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 4044R Coolant Capacity FAQ
How much coolant does the John Deere 4044R take?
The John Deere 4044R takes 2 gal (7.6 L) of coolant. Final level can settle after trapped air leaves the cooling system
Does the John Deere 4044R use John Deere Cool-Gard coolant?
The John Deere 4044R coolant spec points to John Deere Cool-Gard II. That matters because the wrong coolant can reduce corrosion and cavitation protection
What coolant and water mix is used in the John Deere 4044R?
The John Deere 4044R antifreeze guidance is 40/60 coolant and water mix. Check the coolant label before mixing concentrate and water
Do I need to recheck coolant level after servicing the John Deere 4044R?
After a coolant change on the John Deere 4044R, check for leaks, watch temperature and recheck the level once the engine cools down
When should contaminated coolant be replaced in the John Deere 4044R?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 4044R cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
