The John Deere 4044M is 53.6 in wide and 100.2 in tall.
Width53.6 in (4 ft 5.6 in) / 1,361.4 mm
Height100.2 in (8 ft 4.2 in) / 2,545.1 mm
Ground clearance13.8 in (1 ft 1.8 in) / 350.5 mm
John Deere 4044M Dimensions
Overall width
53.6 in (4 ft 5.6 in) / 1,361.4 mm
Overall height
100.2 in (8 ft 4.2 in) / 2,545.1 mm
Ground clearance
13.8 in (1 ft 1.8 in) / 350.5 mm
Tractor Size Comparison Chart
Overall width comparison
This model
53.6 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
100.2 in
Average
79.8 in
Low
36 in
High
156 in
Ground clearance comparison
This model
13.8 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 4044M Extra Dimension Notes
Storage fit note
For the John Deere 4044M, storage should be planned around a taller opening. With width 53.6 in (4 ft 5.6 in) / 1,361.4 mm and height 100.2 in (8 ft 4.2 in) / 2,545.1 mm, height is likely the key check.
Fitment note
The John Deere 4044M is best judged by width at 53.6 in (4 ft 5.6 in) / 1,361.4 mm and height at 100.2 in (8 ft 4.2 in) / 2,545.1 mm. The biggest issue is usually width or height, not just floor length.
Ground clearance note
The John Deere 4044M ground clearance spec is 13.8 in (1 ft 1.8 in) / 350.5 mm. It helps decide how forgiving the tractor is on uneven ground.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
For this class, doorway width and attachment clearance are major planning numbers.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 100.2 in height, 53.6 in width and length not captured length with margin. Around 12 ft high and 10 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: 100.2 in high, 53.6 in wide and length not captured long. Then step up to a practical storage target of about 12 ft high and 10 ft wide.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a length not captured long tractor, about a clear straight approach before the doorway outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
