Coolant capacity for the John Deere 335 is 9.51 gal (36 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 40/60 coolant and water mix.
John Deere 335 Coolant Capacity Specs
| Coolant capacity | 9.51 gal (36 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 40/60 coolant and water mix |
| Engine horsepower | 20 hp |
John Deere 335 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere 335 Coolant Service Notes
| Coolant capacity note | For the John Deere 335, the coolant capacity is 9.51 gal (36 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | A proper coolant change on the John Deere 335 means using the 9.51 gal (36 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 40/60 coolant and water mix |
| Coolant type note | For the John Deere 335, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use |
| Antifreeze mix note | The John Deere 335 coolant mix guidance is 40/60 coolant and water mix. This matters most in freezing weather, hot work and long service intervals |
| Refill check | For the John Deere 335, 9.51 gal (36 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system |
| Engine context | The engine context for the John Deere 335 is engine horsepower 20 hp. Use this for comparison only; the refill amount is the coolant capacity above |
John Deere 335 Coolant Capacity FAQ
What is the John Deere 335 coolant capacity?
The listed coolant amount for the John Deere 335 is 9.51 gal (36 L). It is a refill guide, not a reason to ignore the actual level marks
Which coolant is listed for the John Deere 335?
The John Deere 335 is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere 335 use?
Use the listed 40/60 coolant and water mix mix when refilling the John Deere 335. Too much water weakens protection; too much concentrate can also reduce cooling performance
What should I check after refilling coolant in the John Deere 335?
After refilling the John Deere 335, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
Is a coolant top-up enough before using the John Deere 335?
A top-up is only a level correction. A flush is the better choice if the John Deere 335 has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
