The John Deere 3200 tractor hydraulic pump flow is 9.5 GPM, and hydraulic system pressure is 2,150 psi.
Hydraulic pump flow9.5 GPM
Implement flow32 GPM
Total hydraulic flow33.5 GPM
Hydraulic pressure2,150 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity4 gal
John Deere 3200 Hydraulic Flow Details
Hydraulic pump flow
9.5 GPM
Implement hydraulic flow
32 GPM
Total hydraulic flow
33.5 GPM
Hydraulic system pressure
2,150 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
4 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
9.5 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
32 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
33.5 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,150 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
4 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 3200 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 3200 separates implement flow from total hydraulic flow: 32 GPM is the more useful number for rear remotes and hydraulic implements, while 33.5 GPM includes the wider system total.
Hydraulic pressure note
Hydraulic pressure on the John Deere 3200 is 2,150 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (32 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 3200: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 3200 is 4 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
