The John Deere 3130 is 120 in long, 48 in wide, and 84 in tall, with a 84.3 in wheelbase.
Length120 in (10 ft 0 in) / 3,048 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height84 in (7 ft 0 in) / 2,133.6 mm
Wheelbase84.3 in (7 ft 0.3 in) / 2,141.2 mm
Ground clearance12.6 in (1 ft 0.6 in) / 320 mm
John Deere 3130 Dimensions
Overall length
120 in (10 ft 0 in) / 3,048 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
84 in (7 ft 0 in) / 2,133.6 mm
Wheelbase
84.3 in (7 ft 0.3 in) / 2,141.2 mm
Ground clearance
12.6 in (1 ft 0.6 in) / 320 mm
Tractor Size Comparison Chart
Overall length comparison
This model
120 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
48 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
84 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
84.3 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
12.6 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 3130 Extra Dimension Notes
Storage fit note
The John Deere 3130 may be garage-friendly in some setups, but only after checking the actual door height and width. With length 120 in (10 ft 0 in) / 3,048 mm, width 48 in (4 ft 0 in) / 1,219.2 mm, and height 84 in (7 ft 0 in) / 2,133.6 mm, measure before assuming fit.
Fitment note
The John Deere 3130 dimensions are useful because they show length at 120 in (10 ft 0 in) / 3,048 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 84 in (7 ft 0 in) / 2,133.6 mm. That tells you more than the model series alone.
Wheelbase note
The wheelbase spec for the John Deere 3130 is 84.3 in (7 ft 0.3 in) / 2,141.2 mm. It helps round out the dimension picture.
Ground clearance note
The John Deere 3130 ground clearance is 12.6 in (1 ft 0.6 in) / 320 mm. This matters if the machine will work in paddocks rather than only yards.
Storage Tips
Garage-style storage may work, but judge it against a clear opening around 8 ft high, 8 ft wide, and 15 ft deep, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 8 ft high, 8 ft wide, and 15 ft deep.
This size is still realistic for smaller sheds when the approach is straight and the attachments are removed.
The 84.3 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
With 84 in height and 48 in width, the doorway is the first limit; with 120 in length, bay depth is the second. Start with 8 ft high, 8 ft wide, and 15 ft deep, not the bare dimensions.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than 8 ft by 8 ft. The tractor’s base size is 120 in long and 48 in wide before attachments.
Do attachments change the storage size?
Yes. The John Deere 3130’s 48 in width and 84 in height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A door sized around 8 ft is only useful if the tractor can enter square. The John Deere 3130’s 84.3 in wheelbase means the approach path matters as much as the opening.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
