The John Deere 310C is 86.4 in wide and 135.6 in tall.
Width86.4 in (7 ft 2.4 in) / 2,194.6 mm
Height135.6 in (11 ft 3.6 in) / 3,444.2 mm
John Deere 310C Dimensions
Overall width
86.4 in (7 ft 2.4 in) / 2,194.6 mm
Overall height
135.6 in (11 ft 3.6 in) / 3,444.2 mm
Rear tread width
64 in (5 ft 4 in) / 1,625.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
86.4 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
135.6 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 310C Extra Dimension Notes
Fitment note
The John Deere 310C fitment details are width at 86.4 in (7 ft 2.4 in) / 2,194.6 mm and height at 135.6 in (11 ft 3.6 in) / 3,444.2 mm. Compare them against the smallest opening it has to pass through.
Tread width note
The John Deere 310C rear tread width comes through as 64 in (5 ft 4 in) / 1,625.6 mm. Check front tread separately if row spacing matters.
Storage Tips
Use the bare dimensions only as a starting point; a practical storage target is 15 ft high and 12 ft wide.
Height is the risky number here; check beams, door tracks and roof bracing.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 135.6 in tall or 86.4 in wide, count it as too tight. The safer check for the John Deere 310C is around 15 ft high and 12 ft wide.
What size door should I check?
Use 15 ft high and 12 ft wide as the door-and-bay target. That is based on the tractor’s 135.6 in height, 86.4 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 86.4 in wide and 135.6 in tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
Because the John Deere 310C is length not captured long and 86.4 in wide, do not plan on turning sharply at the doorway. Leave about a clear straight approach before the doorway to line up before entering.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
