John Deere 3039R Dimensions, Length, Width & Height

Quick answer:

The John Deere 3039R is 40.6 in wide, with a 68 in wheelbase.

Width40.6 in (3 ft 4.6 in) / 1,031.2 mm
Wheelbase68 in (5 ft 8 in) / 1,727.2 mm
Ground clearance12.2 in (1 ft 0.2 in) / 309.9 mm

John Deere 3039R Dimensions

Overall width 40.6 in (3 ft 4.6 in) / 1,031.2 mm
Wheelbase 68 in (5 ft 8 in) / 1,727.2 mm
Ground clearance 12.2 in (1 ft 0.2 in) / 309.9 mm
Rear tread width 40.6 in (3 ft 4.6 in) / 1,031.2 mm

Tractor Size Comparison Chart

Overall width comparison

This model

40.6 in

Average

64.6 in

Low

20 in

High

144 in

Wheelbase comparison

This model

68 in

Average

79.2 in

Low

34.8 in

High

190.5 in

Ground clearance comparison

This model

12.2 in

Average

16.4 in

Low

3.5 in

High

65.4 in

John Deere 3039R Extra Dimension Notes

Storage fit note The John Deere 3039R may be garage-friendly in some setups, but only after checking the actual door height and width. With width 40.6 in (3 ft 4.6 in) / 1,031.2 mm, measure before assuming fit.
Fitment note The John Deere 3039R footprint is defined by width at 40.6 in (3 ft 4.6 in) / 1,031.2 mm. For storage, the tight point is usually the door opening.
Wheelbase note For the John Deere 3039R, wheelbase is 68 in (5 ft 8 in) / 1,727.2 mm. It is an important part of the size story.
Ground clearance note The John Deere 3039R has listed clearance of 12.2 in (1 ft 0.2 in) / 309.9 mm. More clearance is useful where the tractor has to straddle rough or raised ground.
Tread width note The John Deere 3039R rear tread-width data shows 40.6 in (3 ft 4.6 in) / 1,031.2 mm. That still helps with stance and row-spacing checks.

Storage Tips

  • Garage-style storage may work, but judge it against 8 ft wide, not the exact tractor dimensions.
  • Expect large shed requirements, especially with duals, tracks or implements fitted.
  • The 68 in wheelbase is useful when judging trailer position and shed maneuvering room.

Storage FAQ

Will it fit in a garage?

Do not judge it by floor length alone. This tractor is length not captured long, 40.6 in wide and height not captured tall, so the garage check needs height, width and depth clearance together: about 8 ft wide.

What size door should I check?

For this very large farm tractor, check the narrowest real opening. A doorway close to 40.6 in wide or height not captured tall is not enough; aim for roughly 8 ft wide.

Do attachments change the storage size?

Yes. The bare tractor is length not captured long, 40.6 in wide and height not captured tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.

How much maneuvering room should I allow?

If attachments stay fitted, maneuvering room must be based on the attached length, not just the length not captured bare tractor length and 68 in wheelbase.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.