The John Deere 285 is 69.4 in long, 36.8 in wide, and 43.6 in tall.
Length69.4 in (5 ft 9.4 in) / 1,762.8 mm
Width36.8 in (3 ft 0.8 in) / 934.7 mm
Height43.6 in (3 ft 7.6 in) / 1,107.4 mm
John Deere 285 Dimensions
Overall length
69.4 in (5 ft 9.4 in) / 1,762.8 mm
Overall width
36.8 in (3 ft 0.8 in) / 934.7 mm
Overall height
43.6 in (3 ft 7.6 in) / 1,107.4 mm
Rear tread width
66 in (5 ft 6 in) / 1,676.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
69.4 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
36.8 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
43.6 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 285 Extra Dimension Notes
Size class note
The John Deere 285 size class is small compact tractor for practical planning. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere 285 may be garage-friendly in some setups, but only after checking the actual door height and width. With length 69.4 in (5 ft 9.4 in) / 1,762.8 mm, width 36.8 in (3 ft 0.8 in) / 934.7 mm, and height 43.6 in (3 ft 7.6 in) / 1,107.4 mm, measure before assuming fit.
Fitment note
The John Deere 285 fitment numbers are length at 69.4 in (5 ft 9.4 in) / 1,762.8 mm, width at 36.8 in (3 ft 0.8 in) / 934.7 mm, and height at 43.6 in (3 ft 7.6 in) / 1,107.4 mm. These decide whether it is garage-like, shed-like or machinery-shed size.
Tread width note
The John Deere 285 rear tread-width data shows 66 in (5 ft 6 in) / 1,676.4 mm. That still helps with stance and row-spacing checks.
Storage Tips
Garage-style storage may work, but judge it against a clear opening around 7 ft high, 8 ft wide, and 15 ft deep, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 7 ft high, 8 ft wide, and 15 ft deep.
Small tractor storage is usually about door height first, then attachment depth.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 43.6 in tall or 36.8 in wide, count it as too tight. The safer check for the John Deere 285 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 43.6 in height, 36.8 in width and 69.4 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 43.6 in for overhead clearance, 36.8 in for side clearance and 69.4 in for bay depth.
How much maneuvering room should I allow?
Use the 69.4 in length as the maneuvering clue here. A bay around 15 ft deep still needs approach room outside the shed, especially if implements stay fitted.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
