The John Deere 2755 has a 3-point hitch lift capacity of 3,720 lb (1,687 kg). It also lists hitch category Category 2 and rear PTO power 75 hp.
Best rear lift figure3,720 lb (1,687 kg)
Hitch categoryCategory 2
Rear PTO horsepower75 hp
John Deere 2755 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,720 lb (1,687 kg)
Hitch category
Category 2
Rear PTO horsepower
75 hp
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,720 lb
Average
8,101 lb
Low
550 lb
High
29,750 lb
Rear PTO horsepower comparison
This model
75 hp
Average
132 hp
Low
11 hp
High
620 hp
John Deere 2755 Hitch and Rear Lift Notes
Hitch category note
Category matters as much as capacity. The John Deere 2755 is listed with Category 2, so implement pins and hitch width need to suit that setup
PTO and weight context
Use the rear lift spec first, then use rear PTO horsepower is 75 hp to judge whether the implement is sensible for real work
Rear implement matching
Rear hitch capacity is most useful when comparing actual implement weights, especially for hay equipment, larger mower, cultivator, heavy blade, and mounted planter
John Deere 2755 3-Point Hitch FAQ
How strong is the John Deere 2755 3-point hitch?
The John Deere 2755 hitch data points to 3,720 lb (1,687 kg) for 3-point hitch lift capacity. In practical terms, this puts it in strong utility or row-crop tractor territory.
Is rear lift capacity always measured the same way?
No. For the John Deere 2755, check whether the figure is measured at the hitch ends or 24 in / 610 mm behind the hitch. The behind-the-hitch number is usually more realistic.
Can the John Deere 2755 use any rear implement?
No. Start with the Category 2 hitch category, then check implement weight against the listed 3,720 lb (1,687 kg) 3-point hitch lift rating.
How should I match rear implements to the John Deere 2755?
Start with 3,720 lb (1,687 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include hay equipment, larger mower, cultivator, heavy blade, and mounted planter.
Is 75 hp rear PTO power enough for implements?
It depends on the implement. Use 75 hp for powered equipment matching, and use 3,720 lb (1,687 kg) for rear lift matching.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official deere.com website for official information before buying or lifting heavy implements.
