Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 2735 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 2735 is 9.5 gal (36 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
Use 9.5 gal (36 L) as the refill amount for the John Deere 2735, but do not mix coolant types blindly. The listed coolant detail is John Deere Cool-Gard II
Coolant type note
The listed coolant type for the John Deere 2735 is John Deere Cool-Gard II. Match the coolant chemistry before topping up or flushing the system
Refill check
When refilling the John Deere 2735, do not pour in 9.5 gal (36 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
The engine context for the John Deere 2735 is engine horsepower 55 hp and engine displacement 239 cu in (3.92 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 2735 Coolant Capacity FAQ
How many gallons of coolant does the John Deere 2735 hold?
A full coolant refill on the John Deere 2735 is listed at 9.5 gal (36 L). Fill slowly and allow for a small top-up after the first heat cycle
What antifreeze coolant type is listed for the John Deere 2735?
The John Deere 2735 coolant listing shows John Deere Cool-Gard II. Use the operator manual and coolant label to confirm compatibility
Why does coolant level drop after changing coolant in the John Deere 2735?
Check the John Deere 2735 coolant level cold after service. Hot coolant is pressurized and dangerous, so let the system cool before opening the cap
Is topping up enough for the John Deere 2735 cooling system?
If coolant condition is good, topping up may be enough. If it is old or contaminated, a full drain and refill is safer for the John Deere 2735
What if I do not know what coolant is already in the John Deere 2735?
Do not rely on color alone when topping up the John Deere 2735. Use coolant compatible with John Deere Cool-Gard II, or drain and refill if the old coolant type is unknown
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
