The John Deere 2520 is 132 in long, 84 in wide, and 84 in tall.
Length132 in (11 ft 0 in) / 3,352.8 mm
Width84 in (7 ft 0 in) / 2,133.6 mm
Height84 in (7 ft 0 in) / 2,133.6 mm
John Deere 2520 Dimensions
Overall length
132 in (11 ft 0 in) / 3,352.8 mm
Overall width
84 in (7 ft 0 in) / 2,133.6 mm
Overall height
84 in (7 ft 0 in) / 2,133.6 mm
Rear tread width
37.6 in (3 ft 1.6 in) / 955 mm
Tractor Size Comparison Chart
Overall length comparison
This model
132 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
84 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
84 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 2520 Extra Dimension Notes
Size class note
The John Deere 2520 should be judged as a utility tractor before deciding if it fits storage or transport. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Fitment note
The John Deere 2520 has listed dimensions of length at 132 in (11 ft 0 in) / 3,352.8 mm, width at 84 in (7 ft 0 in) / 2,133.6 mm, and height at 84 in (7 ft 0 in) / 2,133.6 mm. Treat them as the starting point for storage and trailer planning.
Tread width note
The captured tread data for the John Deere 2520 gives rear tread only: 37.6 in (3 ft 1.6 in) / 955 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Utility tractors are usually happier in a farm shed than a residential-style garage.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 84 in tall or 84 in wide, count it as too tight. The safer check for the John Deere 2520 is around 9 ft high, 10 ft wide, and 15 ft deep.
What size door should I check?
Use the John Deere 2520’s dimensions directly: 84 in tall needs more than a 84 in opening, 84 in wide needs side clearance, and 132 in long needs about 15 ft bay depth.
Do attachments change the storage size?
Yes. If the storage target is 9 ft high, 10 ft wide, and 15 ft deep, attachments should be checked against that, not against the bare 132 in length alone.
How much maneuvering room should I allow?
Without a captured wheelbase, the practical rule is simple: give the 132 in tractor length enough straight approach before the 10 ft doorway.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
