The John Deere 240 is 63 in wide, with a 43.2 in wheelbase.
Width63 in (5 ft 3 in) / 1,600.2 mm
Wheelbase43.2 in (3 ft 7.2 in) / 1,097.3 mm
Ground clearance8.2 in / 208.3 mm
John Deere 240 Dimensions
Overall width
63 in (5 ft 3 in) / 1,600.2 mm
Wheelbase
43.2 in (3 ft 7.2 in) / 1,097.3 mm
Ground clearance
8.2 in / 208.3 mm
Tractor Size Comparison Chart
Overall width comparison
This model
63 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
43.2 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
8.2 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 240 Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere 240 is in the smaller end of tractor sizing. With width 63 in (5 ft 3 in) / 1,600.2 mm, standard-style storage may be possible, but attachments can change the answer.
Fitment note
The John Deere 240 size check comes down to width at 63 in (5 ft 3 in) / 1,600.2 mm. If storage is tight, measure before transport day.
Wheelbase note
The John Deere 240 wheelbase is 43.2 in (3 ft 7.2 in) / 1,097.3 mm. That is the number to compare when two tractors have similar length but different stance.
Ground clearance note
Ground clearance for the John Deere 240 comes out at 8.2 in / 208.3 mm. It is a useful field-work comparison number.
Storage Tips
The John Deere 240 is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
Recommended storage clearance: target about 120 in (10 ft) clear width.
Longer wheelbase machines are easier to store when the door approach is straight and uncluttered.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, 63 in width and length not captured length with margin. Around 10 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: height not captured high, 63 in wide and length not captured long. Then step up to a practical storage target of about 10 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 43.2 in wheelbase and 63 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
