The John Deere 2036R tractor hydraulic pump flow is 9.3 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow9.3 GPM
Implement flow9.3 GPM
Total hydraulic flow9.3 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity6.2 gal
John Deere 2036R Hydraulic Flow Details
Hydraulic pump flow
9.3 GPM
Implement hydraulic flow
9.3 GPM
Total hydraulic flow
9.3 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
6.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
9.3 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
9.3 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
9.3 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
6.2 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 2036R Extra Hydraulic Notes
Hydraulic flow note
With about 9.3 GPM implement flow, the John Deere 2036R sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
Hydraulic pressure on the John Deere 2036R is 2,500 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (9.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2036R’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 2036R’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
