The blade set part number found is M168223. The blade measurement captured is length 23 in (584 mm).
John Deere 200 Mower Blade Size and Part Numbers
| Mower blade set part number | M168223 |
|---|---|
| Blade length | 23 in (584 mm) |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade length comparison
John Deere 200 Blade Notes
| Blade note | The John Deere 200 blade listing captured here shows blade set part number M168223 and length 23 in (584 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Blade type note | The blade type captured for the John Deere 200 is high-lift, mulching, standard, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | The blunt rule with the John Deere 200: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere 200 Mower Blade FAQ
Is a close blade length good enough for the John Deere 200?
The blade length found is 23 in (584 mm). Close is not the same as correct. That is a longer mower blade, so wrong lift or wrong center hole can cause vibration, poor discharge or deck contact. Match the OEM number or old blade before buying
Which blade type should you use on the John Deere 200?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. Use that against the captured fitment value 23 in (584 mm). High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
