The John Deere 1840 tractor hydraulic pump flow is 10.3 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow10.3 GPM
Implement flow10.3 GPM
Total hydraulic flow10.3 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity39 L (10.3 gal)
John Deere 1840 Hydraulic Flow Details
Hydraulic pump flow
10.3 GPM
Implement hydraulic flow
10.3 GPM
Total hydraulic flow
10.3 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
39 L (10.3 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
10.3 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
10.3 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
10.3 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10.3 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 1840 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 1840 should be matched to implements that fit its 10.3 GPM hydraulic-flow range.
Hydraulic pressure note
Hydraulic pressure on the John Deere 1840 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (10.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 1840’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
The John Deere 1840’s hydraulic fluid capacity is listed as 39 L (10.3 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
