The John Deere 1420 dimension set places it in tractor sizing. It is worth checking the listed measurements against your shed, gate, trailer and storage space.
Wheelbase note
The wheelbase spec for the John Deere 1420 is 49.2 in (4 ft 1.2 in) / 1,249.7 mm. It helps round out the dimension picture.
Ground clearance note
The John Deere 1420 ground clearance is 6 in / 152.4 mm. This matters if the machine will work in paddocks rather than only yards.
Tread width note
The John Deere 1420 rear tread-width data shows 18 in (1 ft 6 in) / 457.2 mm. That still helps with stance and row-spacing checks.
Storage Tips
Use the listed dimensions as a first check, then measure the exact shed opening.
Use the bare dimensions only as a starting point; a practical storage target is a measured doorway and bay with spare clearance.
The 49.2 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, width not captured width and length not captured length with margin. Around a measured opening with spare clearance on every side is the no-drama check.
What size door should I check?
Measure the real clear opening, not the advertised door size. You need it to clear the John Deere 1420’s height not captured height and width not captured width, with about the tractor length plus attachment room for the length not captured length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this tractor, allow about 3 ft to 8 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the the tractor width plus side clearance target, approach angle matters more. The John Deere 1420’s width not captured width and 49.2 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
