The John Deere 140 is 67.5 in long, 38 in wide, and 43 in tall, with a 48.9 in wheelbase.
Length67.5 in (5 ft 7.5 in) / 1,714.5 mm
Width38 in (3 ft 2 in) / 965.2 mm
Height43 in (3 ft 7 in) / 1,092.2 mm
Wheelbase48.9 in (4 ft 0.9 in) / 1,242.1 mm
John Deere 140 Dimensions
Overall length
67.5 in (5 ft 7.5 in) / 1,714.5 mm
Overall width
38 in (3 ft 2 in) / 965.2 mm
Overall height
43 in (3 ft 7 in) / 1,092.2 mm
Wheelbase
48.9 in (4 ft 0.9 in) / 1,242.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
67.5 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
38 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
43 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
48.9 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 140 Extra Dimension Notes
Size class note
The John Deere 140 dimension set places it in small compact tractor sizing. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere 140 may be garage-friendly in some setups, but only after checking the actual door height and width. With length 67.5 in (5 ft 7.5 in) / 1,714.5 mm, width 38 in (3 ft 2 in) / 965.2 mm, and height 43 in (3 ft 7 in) / 1,092.2 mm, measure before assuming fit.
Fitment note
The John Deere 140 dimensions are useful because they show length at 67.5 in (5 ft 7.5 in) / 1,714.5 mm, width at 38 in (3 ft 2 in) / 965.2 mm, and height at 43 in (3 ft 7 in) / 1,092.2 mm. That tells you more than the model series alone.
Wheelbase note
The wheelbase spec for the John Deere 140 is 48.9 in (4 ft 0.9 in) / 1,242.1 mm. It helps round out the dimension picture.
Storage Tips
Garage-style storage may work, but judge it against a clear opening around 7 ft high, 8 ft wide, and 15 ft deep, not the exact tractor dimensions.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
Small tractor storage is usually about door height first, then attachment depth.
The 48.9 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is 67.5 in long, 38 in wide and 43 in tall, so the garage check needs height, width and depth clearance together: about 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere 140’s 43 in height and 38 in width point to about 7 ft high and 8 ft wide, with 15 ft depth.
Do attachments change the storage size?
Yes. If the bay only clears the listed 67.5 in length, it is too short once attachments stay on. Use about 15 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 67.5 in length needs bay depth, but the 48.9 in wheelbase needs lineup room. Treat about 12 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
