The John Deere 115 is 130.5 in long, with a 70 in wheelbase.
Length130.5 in (10 ft 10.5 in) / 3,314.7 mm
Wheelbase70 in (5 ft 10 in) / 1,778 mm
John Deere 115 Dimensions
Overall length
130.5 in (10 ft 10.5 in) / 3,314.7 mm
Wheelbase
70 in (5 ft 10 in) / 1,778 mm
Front tread width
50 in (4 ft 2 in) / 1,270 mm
Rear tread width
54 in (4 ft 6 in) / 1,371.6 mm
Tractor Size Comparison Chart
Overall length comparison
This model
130.5 in
Average
138.9 in
Low
63 in
High
346.3 in
Wheelbase comparison
This model
70 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere 115 Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere 115 should be checked against the real bay size. With length 130.5 in (10 ft 10.5 in) / 3,314.7 mm, do not rely on class alone.
Fitment note
The John Deere 115 has listed dimensions of length at 130.5 in (10 ft 10.5 in) / 3,314.7 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 115 wheelbase is listed at 70 in (5 ft 10 in) / 1,778 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Storage Tips
Do not assume storage fit until the real doorway and attachment setup are checked.
Use the bare dimensions only as a starting point; a practical storage target is 15 ft deep.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 70 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
For this compact tractor, garage fit is not a yes/no from the model name. Compare the actual 130.5 in length, width not captured width and height not captured height against a clear 15 ft deep space.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere 115’s height not captured height and width not captured width point to about the tractor height plus clearance high and the tractor width plus side clearance wide, with 15 ft depth.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: 130.5 in long, width not captured wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 70 in wheelbase, about 13 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
