The John Deere 1120 is 135 in long, 66.1 in wide, and 90.9 in tall, with a 80.7 in wheelbase.
Length135 in (11 ft 3 in) / 3,429 mm
Width66.1 in (5 ft 6.1 in) / 1,678.9 mm
Height90.9 in (7 ft 6.9 in) / 2,308.9 mm
Wheelbase80.7 in (6 ft 8.7 in) / 2,049.8 mm
John Deere 1120 Dimensions
Overall length
135 in (11 ft 3 in) / 3,429 mm
Overall width
66.1 in (5 ft 6.1 in) / 1,678.9 mm
Overall height
90.9 in (7 ft 6.9 in) / 2,308.9 mm
Wheelbase
80.7 in (6 ft 8.7 in) / 2,049.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
135 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
66.1 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
90.9 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
80.7 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 1120 Extra Dimension Notes
Storage fit note
The John Deere 1120 storage fit is possible in the right shed. With length 135 in (11 ft 3 in) / 3,429 mm, width 66.1 in (5 ft 6.1 in) / 1,678.9 mm, and height 90.9 in (7 ft 6.9 in) / 2,308.9 mm, leave space for attachments and turning room.
Fitment note
For shed planning, the John Deere 1120 should be checked with length at 135 in (11 ft 3 in) / 3,429 mm, width at 66.1 in (5 ft 6.1 in) / 1,678.9 mm, and height at 90.9 in (7 ft 6.9 in) / 2,308.9 mm. Door height and width are the usual deal-breakers.
Wheelbase note
The John Deere 1120 wheelbase measurement is 80.7 in (6 ft 8.7 in) / 2,049.8 mm. It shows more than a simple model-series label.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
Measure the lowest overhead point, not the tallest part of the shed roof.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 80.7 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is 135 in long, 66.1 in wide and 90.9 in tall, so the garage check needs height, width and depth clearance together: about 9 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
A good doorway should let the tractor enter straight without clipping mirrors, tires or door tracks. With 66.1 in width and 90.9 in height, use around 8 ft wide and 9 ft high.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 90.9 in for overhead clearance, 66.1 in for side clearance and 135 in for bay depth.
How much maneuvering room should I allow?
Use the 80.7 in wheelbase plus the 135 in length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
