Coolant capacity for the John Deere 102 is 0.37 gal (1.4 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 60% antifreeze/coolant mix.
John Deere 102 Coolant Capacity Specs
| Coolant capacity | 0.37 gal (1.4 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 60% antifreeze/coolant mix |
| Engine horsepower | 17.5 hp |
John Deere 102 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere 102 Coolant Service Notes
| Coolant capacity note | The useful service number here is 0.37 gal (1.4 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up |
|---|---|
| Coolant service note | A proper coolant change on the John Deere 102 means using the 0.37 gal (1.4 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 60% antifreeze/coolant mix |
| Coolant type note | For the John Deere 102, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use |
| Antifreeze mix note | The John Deere 102 coolant mix guidance is 60% antifreeze/coolant mix. This matters most in freezing weather, hot work and long service intervals |
| Refill check | For the John Deere 102, 0.37 gal (1.4 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system |
| Engine context | For comparison, the John Deere 102 engine details listed here are engine horsepower 17.5 hp. The coolant capacity remains the service number to use for refilling |
John Deere 102 Coolant Capacity FAQ
What is the John Deere 102 cooling system capacity?
The listed coolant amount for the John Deere 102 is 0.37 gal (1.4 L). It is a refill guide, not a reason to ignore the actual level marks
What coolant is recommended for the John Deere 102?
The John Deere 102 is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere 102 use?
The John Deere 102 uses 60% antifreeze/coolant mix where that mix is specified. Confirm the mix against your climate and manual
Can the John Deere 102 coolant level drop after refilling?
After refilling the John Deere 102, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
Should I flush the John Deere 102 cooling system or just top it up?
A top-up is only a level correction. A flush is the better choice if the John Deere 102 has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
