The J.I. Case 300 tractor weighs 3,400 lb (1,542 kg) using its primary published weight. That places it around the 36th percentile among comparable utility tractors, on the lighter side of its peer group. With 22 hp, the tractor carries about 154.6 lb of published weight per horsepower.
The published J.I. Case 300 weight is 3,400 lb (1,542 kg). The primary figure used for comparisons is 3,400 lb (1,542 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
3,400 lb
Low1,537 lb
This model3,400 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,400 lb (1,542 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower22 hp / 16.4 kW
Max length125 in (317 cm)
Max height56 in (142 cm)
Overview
Model information
Manufacturer
J.I. Case
Model
300
Category
Farm tractor
Model years
1956 – 1958
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,400 lb
1,542 kg
1.7
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase75.5 in (191 cm)
Length125 in (317 cm)
Height56 in (142 cm)
Power & weight ratios
Primary power22 hp (16.4 kW)
Power basisDrawbar (claimed)
Weight per horsepower154.6 lb/hp
Weight per foot of length326.4 lb/ft
Wheelbase / length60.4%
Transport snapshot
Primary published weight3,400 lb (1,542 kg)
Maximum published weight3,400 lb (1,542 kg)
Maximum US-ton equivalent1.7 US tons
Weight context
Weight range3,400 lb (1,542 kg)
Primary weight basisWeight
Peer positionAverage among Utility Tractor peers · 37th percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,400 lb (1.7 US tons); published configurations reach 3,400 lb (1.7 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Ford 741 (3400 lb)
Ford 771 (3400 lb)
Ford 820 (3400 lb)
Ford 840 (3400 lb)
Ford 850 (3400 lb)
Closest comparable tractors
Massey Ferguson 133 Westland (3541 lb)
Ford 2110 (3635 lb)
J.I. Case 310 (3200 lb, 23 hp)
Case IH Farmall 35A Series II (3067 lb)
Case IH Farmall 40A Series II (3067 lb)
Common questions
J.I. Case 300 weight FAQ
How much does a J.I. Case 300 weigh?
The J.I. Case 300 weighs 3,400 lb (1,542 kg) using the primary published weight figure.
Is the J.I. Case 300 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 37th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 1,863 lb lighter than the peer-group average of 5,263 lb.
What is the J.I. Case 300 weight-to-horsepower ratio?
Using the page’s representative 3,400 lb weight and 22 hp power figure, the tractor carries about 154.6 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the J.I. Case 300 weigh?
The representative published weight is about 1.7 US tons, while the full published range is 1.7 US tons. Loaded transport weight can be higher than the tractor specification.
