The J.I. Case 210-B tractor weighs 2,862 lb (1,298 kg) using its primary published weight. That places it around the 29th percentile among comparable utility tractors, on the lighter side of its peer group. With 30 hp, the tractor carries about 95.4 lb of published weight per horsepower.
The published J.I. Case 210-B weight is 2,862 lb (1,298 kg). The primary figure used for comparisons is 2,862 lb (1,298 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Light
2,862 lb
Low1,537 lb
This model2,862 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight2,862 lb (1,298 kg)
Overall weight bandLight
Tractor typeUtility Tractor
Primary horsepower30 hp / 22.4 kW
Max length126.6 in (321 cm)
Max width60 in (152 cm)
Overview
Model information
Manufacturer
J.I. Case
Model
210-B
Category
Farm tractor
Model years
1958 – 1959
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
2,862 lb
1,298 kg
1.43
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase75.5 in (191 cm)
Length126.6 in (321 cm)
Width60 in (152 cm)
Height55.5 in (140 cm)
Power & weight ratios
Primary power30 hp (22.4 kW)
Power basisPTO (claimed)
Weight per horsepower95.4 lb/hp
Weight per foot of length271.3 lb/ft
Wheelbase / length59.6%
Transport snapshot
Primary published weight2,862 lb (1,298 kg)
Maximum published weight2,862 lb (1,298 kg)
Maximum US-ton equivalent1.43 US tons
Maximum published width60 in (152 cm)
Published width over 102 inNo
Weight context
Weight range2,862 lb (1,298 kg)
Primary weight basisWeight
Peer positionLight among Utility Tractor peers · 30th percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 2,862 lb (1.43 US tons); published configurations reach 2,862 lb (1.43 US tons); the widest published tractor dimension is 60 in (5 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Massey Ferguson 2410 (2866 lb)
International Harvester DGD-4 (2855 lb)
Kubota L4200 (2875 lb)
Kubota L4310 (2875 lb)
Massey Ferguson 1835E (2877 lb)
Closest comparable tractors
Kubota L295 (2895 lb, 30 hp)
John Deere 4410 (2900 lb)
Kubota L2850 (2790 lb)
Kubota L3250 (2750 lb)
John Deere 3033R (2900 lb, 31.8 hp)
Common questions
J.I. Case 210-B weight FAQ
How much does a J.I. Case 210-B weigh?
The J.I. Case 210-B weighs 2,862 lb (1,298 kg) using the primary published weight figure.
Is the J.I. Case 210-B a lightweight utility tractor?
Yes. The representative figure sits at about the 30th percentile, lighter than roughly 70% of the utility tractor peers. That puts it in the light range for this comparison. It is 2,401 lb lighter than the peer-group average of 5,263 lb.
How wide is the J.I. Case 210-B for transport?
The maximum published tractor width is 60 in (5 ft). That is 42 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the J.I. Case 210-B weight-to-horsepower ratio?
Using the page’s representative 2,862 lb weight and 30 hp power figure, the tractor carries about 95.4 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the J.I. Case 210-B weigh?
The representative published weight is about 1.43 US tons, while the full published range is 1.43 US tons. Loaded transport weight can be higher than the tractor specification.
