Weight summary
The published John Deere 60 weight is 5,300–7,400 lb (2,404–3,356 kg). The primary figure used for comparisons is 5,800 lb (2,630 kg), listed as Operating. The published configurations span 2,100 lb, a 39.6% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 60 |
| Category | Farm tractor |
| Model years | 1952 – 1956 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | — | 5,300 lb | 2,404 kg | 2.65 | — |
| Operating | — | 5,800 lb | 2,630 kg | 2.9 | — |
| Ballasted | — | 7,400 lb | 3,356 kg | 3.7 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- John Deere 2535 (5800 lb)
- Kubota M4950 (5800 lb)
- John Deere 1950 (5798 lb)
- New Holland Workmaster 75 (5790 lb)
- Allis Chalmers UC (5815 lb)
Closest comparable tractors
- Farmall 460 (5835 lb)
- Farmall 350 (5365 lb)
- J.I. Case DC (5300 lb, 37 hp)
- Farmall 300 (5361 lb, 35.43 hp)
- John Deere 70 (6538 lb)
John Deere 60 weight FAQ
How much does a John Deere 60 weigh?
The John Deere 60 weighs 5,800 lb (2,630 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 5,300 to 7,400 lb (2,404 to 3,356 kg).
What is the operating weight of the John Deere 60 compared with shipping weight?
Published operating weight is 5,800 lb (2,631 kg), versus 5,300 lb (2,404 kg) for shipping weight. That is roughly 500 lb (9.4%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the John Deere 60 weigh with ballast?
The published ballasted weight is 7,400 lb (3,357 kg). That is up to 2,100 lb (39.6%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the John Deere 60 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 12th percentile, lighter than roughly 88% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 8,206 lb lighter than the peer-group average of 14,006 lb.
How wide is the John Deere 60 for transport?
The maximum published tractor width is 86.6 in (7.2 ft). That is 15.4 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 60 weight-to-horsepower ratio?
Using the page’s representative 5,800 lb weight and 37.7 hp power figure, the tractor carries about 153.9 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
