The Ford 2810 tractor specifications include engine power rated at 36.5 hp (27.2 kW), a mechanical shuttle transmission, and a listed weight of 4,420 to 4,995 lbs.
Ford 2810 key specifications
| Engine power |
36.5 hp (27.2 kW) |
| PTO power |
32 hp (23.9 kW) |
| Displacement |
158 cu in (2.6 L) |
| Transmission |
mechanical shuttle |
| Weight |
4,420 to 4,995 lbs |
| Rear PTO speed |
540 rpm |
Ford 2810 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values for Ford farm and compact tractors in this specifications database.
Engine power36.5 hp
Low 13 hpAverage 96.2 hpHigh 360 hp
PTO power32 hp
Low 11 hpAverage 78.8 hpHigh 316 hp
Displacement2.6 L
Low 0.7 LAverage 4.4 LHigh 14.8 L
Maximum listed weight4,995 lbs
Low 1,344 lbsAverage 8,007.5 lbsHigh 32,500 lbs
This model Ford farm and compact tractors average
Ford 2810 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power28.2 hp
Ford 2810 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Ford 2810 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Engine power |
34.3 hp (25.6 kW) |
| Bore/Stroke |
4.20 × 3.80 inches (107 × 97 mm) |
| Rated RPM |
2,000 |
| Torque |
101 lb-ft (137.0 Nm) |
| Torque RPM |
1,400 |
| Compression |
17.3:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
7 qt (6.6 L) |
| Coolant capacity |
11 qt (10.4 L) |
| Starter volts |
12 |
Transmission options
| Gear options |
8 forward and 2 reverse or 6 forward and 4 reverse |
| Clutch |
330 mm dry disc |
| Oil capacity |
12.7 qt (12.0 L) |
PTO and hitch
| Drawbar (tested) |
28.19 hp (21.0 kW) |
| PTO (tested) |
32.83 hp (24.5 kW) |
| Rear hitch category |
Category I |
| Hitch control |
position and draft control |
| Rear lift |
2,936 lbs (1,331 kg) |
| Rear PTO |
independent |
| PTO engine speed |
540 PTO rpm at 1,800 engine rpm |
Hydraulics
| Hydraulic capacity |
12.1 gal (45.8 L) |
| Hydraulic type |
open center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Pump flow |
7.7 gpm (29.1 L/min) |
Mechanical specifications
| Final drives |
inboard planetary |
| Differential lock |
mechanical rear |
| Steering |
manual or 3.6 qt (3.4 L) |
| Steering cap. |
3.6 qt (3.4 L) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Mk I Charging amps |
32 |
| Mk II Charging amps |
51 |
| Battery volts |
12 |
| Battery AH |
51 |
Dimensions and weight
| Listed weight range |
4,420 to 4,995 lbs |
| Length |
127.2 inches (323 cm) |
| Width |
68.4 inches (173 cm) |
| 2WD front axle clearance |
21.5 inches (54 cm) |
| 4WD front axle clearance |
13.1 inches (33 cm) |
| Clearance (rear axle) |
20.5 inches (52 cm) |
| Hood height |
58.8 inches (149 cm) |
| ROPS height |
93.7 inches (237 cm) |
| Exhaust height |
81.2 inches (206 cm) |
Tires and tread
| Rear tread |
56 to 80 inches (142 to 203 cm) |
| 2WD Standard tires (ag) |
Front: 6.00-16. Rear: 13.6-28 |
| 4WD Standard tires (ag) |
Front: 8.3-24. Rear: 13.6-28 |
Attachments
| Attachment weight |
1,035 lbs (469 kg), 1,260 lbs (571 kg), or 1,469 lbs (666 kg) |
| Bucket width |
48, 60, or 72 inches (121, 152, or 182 cm) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the tractor’s original operator, service or parts manual.
