The Ford 276 tractor specifications include engine power rated at 116 hp (86.5 kW), a hydrostatic, 3-range transmission, and a listed weight of 9,300 to 13,500 lbs.
Ford 276 key specifications
| Engine power | 116 hp (86.5 kW) |
|---|---|
| PTO power | 100 hp (74.6 kW) |
| Displacement | 268 cu in (4.4 L) |
| Transmission | hydrostatic, 3-range |
| Fuel capacity | 39 gal (147.6 L) |
| Weight | 9,300 to 13,500 lbs |
| Rear PTO speed | 540 or 1,000 rpm, 1.375-inch shaft |
Ford 276 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values for Ford farm and compact tractors in this specifications database.
Engine power116 hp
Low 13 hpAverage 96.2 hpHigh 360 hp
PTO power100 hp
Low 11 hpAverage 78.8 hpHigh 316 hp
Displacement4.4 L
Low 0.7 LAverage 4.4 LHigh 14.8 L
Fuel capacity39 gal
Low 3.5 galAverage 40.3 galHigh 286 gal
Maximum listed weight13,500 lbs
Low 1,344 lbsAverage 8,007.5 lbsHigh 32,500 lbs
This model Ford farm and compact tractors average
Ford 276 power chart
Compare the available engine, PTO and drawbar power ratings.
Ford 276 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.40 × 4.40 inches (112 × 112 mm) |
|---|---|
| Rated RPM | 2,500 |
| Pre-heating | ether injection |
| Coolant capacity | 23.25 qt (22.0 L) |
| Starter | electric |
| Starter volts | 12 |
Transmission options
| Gears | infinite forward and reverse (3-range) |
|---|---|
| Oil capacity | 34 qt (32.2 L) |
| Transmission type | hydrostatic |
PTO and hitch
| Rear hitch category | Category I/II |
|---|---|
| Hitch control | position control |
| Rear lift (at ends) | 7,000 lbs (3,175 kg) |
| Rear lift (at 24"/610mm) | 4,400 lbs (1,995 kg) |
| Front hitch category | Category I/II |
| Front lift (at ends) | 3,266 lbs (1,481 kg) |
| Front lift (at 24"/610mm) | 2,000 lbs (907 kg) |
| Rear PTO | independent |
| Front PTO speed | 540 rpm, 1.375-inch shaft |
| PTO engine speed | 540 PTO rpm at 2,500 engine rpm |
Hydraulics
| Hydraulic type | closed center load sensing |
|---|---|
| Hydraulic pressure | 2,800 psi (193.1 bar) |
| Valves | 3 |
| Front valves | 2 (optional) |
| Pump flow | 27 gpm (102.2 L/min) |
| Steering flow | 5 gpm (18.9 L/min) |
| Steering pressure | 2,300 psi (158.6 bar) |
Mechanical specifications
| Clutch | wet disc |
|---|---|
| Drive | 4×4 4WD |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Battery CCA | 850 |
| Battery volts | 12 |
Dimensions and weight
| Listed weight range | 9,300 to 13,500 lbs |
|---|---|
| Ground clearance | 24 inches (60 cm) |
| Shipping weight | 9,300 lbs (4,218 kg) |
| Operating weight | 13,500 lbs (6,123 kg, with loader) |
| Maximum drawbar load | 2,500 lbs (1,134 kg) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the tractor’s original operator, service or parts manual.







