The Farmall F-20 tractor weighs 4,400 lb (1,995 kg) using its primary published weight. That places it around the 8th percentile among comparable row-crop tractors, lighter than about 92% of its peers. With 26.7 hp, the tractor carries about 165 lb of published weight per horsepower.
The published Farmall F-20 weight is 4,400 lb (1,995 kg). The primary figure used for comparisons is 4,400 lb (1,995 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Very light
4,400 lb
Low5,300 lb
This model4,400 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight4,400 lb (1,995 kg)
Overall weight bandMidweight
Tractor typeRow-Crop Tractor
Primary horsepower26.7 hp / 19.9 kW
Max length140 in (355 cm)
Max width86 in (218 cm)
Overview
Model information
Manufacturer
Farmall
Model
F-20
Category
Farm tractor
Model years
1932 – 1939
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
4,400 lb
1,995 kg
2.2
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase85 in (215 cm)
Length140 in (355 cm)
Width86 in (218 cm)
Height67 in (170 cm)
Power & weight ratios
Primary power26.7 hp (19.9 kW)
Power basisPTO (claimed)
Weight per horsepower165 lb/hp
Weight per foot of length377.1 lb/ft
Wheelbase / length60.7%
Transport snapshot
Primary published weight4,400 lb (1,995 kg)
Maximum published weight4,400 lb (1,995 kg)
Maximum US-ton equivalent2.2 US tons
Maximum published width86 in (218 cm)
Published width over 102 inNo
Weight context
Weight range4,400 lb (1,995 kg)
Primary weight basisWeight
Peer positionVery light among Row-Crop Tractor peers · 8th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 4,400 lb (2.2 US tons); published configurations reach 4,400 lb (2.2 US tons); the widest published tractor dimension is 86 in (7.2 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Allis Chalmers L (4400 lb)
International Harvester 454 (4400 lb)
Ford 3055 (4409 lb)
John Deere 3045B (4409 lb)
John Deere 3050B (4409 lb)
Closest comparable tractors
Massey Ferguson 165 (4476 lb)
Massey Ferguson 65 (4185 lb)
John Deere 2010 (5054 lb)
J.I. Case SC (4200 lb, 22 hp)
J.I. Case CC (4100 lb, 22.7 hp)
Common questions
Farmall F-20 weight FAQ
How much does a Farmall F-20 weigh?
The Farmall F-20 weighs 4,400 lb (1,995 kg) using the primary published weight figure.
Is the Farmall F-20 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 8th percentile, lighter than roughly 92% of the row-crop tractor peers. That puts it in the very light range for this comparison. It is 9,606 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall F-20 for transport?
The maximum published tractor width is 86 in (7.2 ft). That is 16 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall F-20 weight-to-horsepower ratio?
Using the page’s representative 4,400 lb weight and 26.7 hp power figure, the tractor carries about 165 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Farmall F-20 weigh?
The representative published weight is about 2.2 US tons, while the full published range is 2.2 US tons. Loaded transport weight can be higher than the tractor specification.
