The International Harvester Farmall tractor weighs 4,000 lb (1,814 kg) using its primary published weight. That places it around the 6th percentile among comparable row-crop tractors, lighter than about 94% of its peers. With 13.3 hp, the tractor carries about 301.4 lb of published weight per horsepower.
Tractor weight specifications
International Harvester · Farmall · Tractor weight guide
The published International Harvester Farmall weight is 4,000 lb (1,814 kg). The primary figure used for comparisons is 4,000 lb (1,814 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Very light
4,000 lb
Low5,300 lb
This model4,000 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight4,000 lb (1,814 kg)
Overall weight bandMidweight
Tractor typeRow-Crop Tractor
Primary horsepower13.3 hp / 9.9 kW
Max length136 in (345 cm)
Max width86 in (218 cm)
Overview
Model information
Manufacturer
International Harvester
Model
Farmall
Category
Farm tractor
Model years
1924 – 1932
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
4,000 lb
1,814 kg
2
—
Dimensions, power & hauling
Technical details
Dimensions
Length136 in (345 cm)
Width86 in (218 cm)
Height67 in (170 cm)
Power & weight ratios
Primary power13.3 hp (9.9 kW)
Power basisDrawbar (tested)
Weight per horsepower301.4 lb/hp
Weight per foot of length352.9 lb/ft
Transport snapshot
Primary published weight4,000 lb (1,814 kg)
Maximum published weight4,000 lb (1,814 kg)
Maximum US-ton equivalent2 US tons
Maximum published width86 in (218 cm)
Published width over 102 inNo
Weight context
Weight range4,000 lb (1,814 kg)
Primary weight basisWeight
Peer positionVery light among Row-Crop Tractor peers · 6th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 4,000 lb (2 US tons); published configurations reach 4,000 lb (2 US tons); the widest published tractor dimension is 86 in (7.2 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Farmall Regular (4000 lb)
John Deere 820 (4000 lb)
Kubota KL40Z (4001 lb)
Kubota KL44Z (4001 lb)
J.I. Case 610-B (4010 lb)
Closest comparable tractors
Farmall Regular (4000 lb, 13.27 hp)
Massey Ferguson 65 (4185 lb)
J.I. Case RC (4045 lb, 14.21 hp)
Massey Ferguson 165 (4476 lb)
John Deere 2010 (5054 lb)
Common questions
International Harvester Farmall weight FAQ
How much does an International Harvester Farmall weigh?
The International Harvester Farmall weighs 4,000 lb (1,814 kg) using the primary published weight figure.
Is the International Harvester Farmall a lightweight row-crop tractor?
Yes. The representative figure sits at about the 6th percentile, lighter than roughly 94% of the row-crop tractor peers. That puts it in the very light range for this comparison. It is 10,006 lb lighter than the peer-group average of 14,006 lb.
How wide is the International Harvester Farmall for transport?
The maximum published tractor width is 86 in (7.2 ft). That is 16 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the International Harvester Farmall weight-to-horsepower ratio?
Using the page’s representative 4,000 lb weight and 13.3 hp power figure, the tractor carries about 301.4 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the International Harvester Farmall weigh?
The representative published weight is about 2 US tons, while the full published range is 2 US tons. Loaded transport weight can be higher than the tractor specification.
