Weight summary
The published Allis Chalmers M weight is 6,200 lb (2,812 kg). The primary figure used for comparisons is 6,200 lb (2,812 kg), listed as Weight.
How this weight compares
All tractors in this dataset ยท 2,282 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Allis Chalmers |
|---|---|
| Model | M |
| Category | Farm tractor |
| Model years | 1932 – 1942 |
| Tractor type | Farm tractor |
| Published weight variants | 1 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | โ | 6,200 lb | 2,812 kg | 3.1 | โ |
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- John Deere 2510 (6200 lb)
- Case IH C55 (6196 lb)
- Massey Ferguson 4345 (6211 lb)
- Case IH CS 68 (6217 lb)
- Kubota GM75 (6217 lb)
Closest comparable tractors
- John Deere 2555 (6218 lb)
- John Deere 2755 (6262 lb)
- John Deere 1040 (6107 lb)
- John Deere 2130 (5980 lb)
- Kubota M7500 (5980 lb)
Allis Chalmers M weight FAQ
How much does an Allis Chalmers M weigh?
The Allis Chalmers M weighs 6,200 lb (2,812 kg) using the primary published weight figure.
Is the Allis Chalmers M heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 48th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 3,727 lb lighter than the peer-group average of 9,927 lb.
How wide is the Allis Chalmers M for transport?
The maximum published tractor width is 57.2 in (4.8 ft). That is 44.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Allis Chalmers M weight-to-horsepower ratio?
Using the pageโs representative 6,200 lb weight and 29.6 hp power figure, the tractor carries about 209.1 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Allis Chalmers M weigh?
The representative published weight is about 3.1 US tons, while the full published range is 3.1 US tons. Loaded transport weight can be higher than the tractor specification.
