Weight summary
The published Farmall 544 weight is 6,100–8,310 lb (2,766–3,769 kg). The primary figure used for comparisons is 7,195 lb (3,263 kg), listed as Operating. The published configurations span 2,210 lb, a 36.2% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Farmall |
|---|---|
| Model | 544 |
| Category | Farm tractor |
| Model years | 1968 – 1973 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Gasoline Shipping | — | 6,100 lb | 2,766 kg | 3.05 | — |
| Diesel Shipping | — | 6,300 lb | 2,857 kg | 3.15 | — |
| Operating | — | 7,195 lb | 3,263 kg | 3.6 | — |
| Ballasted | — | 8,310 lb | 3,769 kg | 4.16 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- International Harvester 544 (7195 lb)
- John Deere 5100M (7191 lb)
- New Holland 4635 (7209 lb)
- New Holland L60 (7209 lb)
- Case IH Farmall 95C (7180 lb)
Closest comparable tractors
- John Deere 720 (6790 lb)
- John Deere 70 (6538 lb)
- John Deere 2520 (7130 lb, 61.29 hp)
- John Deere 620 (6800 lb, 48 hp)
- John Deere 730 (7445 lb, 59 hp)
Farmall 544 weight FAQ
How much does a Farmall 544 weigh?
The Farmall 544 weighs 7,195 lb (3,263 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 6,100 to 8,310 lb (2,766 to 3,769 kg).
What is the operating weight of the Farmall 544 compared with shipping weight?
Published operating weight is 7,195 lb (3,264 kg), versus 6,100–6,300 lb (2,767–2,858 kg) for shipping weight. That is roughly 1,095 lb (18%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the Farmall 544 weigh with ballast?
The published ballasted weight is 8,310 lb (3,769 kg). That is up to 2,210 lb (36.2%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Farmall 544 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 17th percentile, lighter than roughly 83% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 6,811 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall 544 for transport?
The maximum published tractor width is 87 in (7.2 ft). That is 15 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall 544 weight-to-horsepower ratio?
Using the page’s representative 7,195 lb weight and 52 hp power figure, the tractor carries about 138.4 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
