Weight summary
The published International Harvester 544 weight is 4,980–7,215 lb (2,258–3,272 kg). The primary figure used for comparisons is 7,195 lb (3,263 kg), listed as Diesel gear Operating. The published configurations span 2,235 lb, a 44.9% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | International Harvester |
|---|---|
| Model | 544 |
| Category | Farm tractor |
| Model years | 1968 – 1973 |
| Tractor type | Utility Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Gasoline Shipping | — | 4,980 lb | 2,258 kg | 2.49 | — |
| Diesel Shipping | — | 5,220 lb | 2,367 kg | 2.61 | — |
| Diesel gear Operating | — | 7,195 lb | 3,263 kg | 3.6 | — |
| Diesel hydro Operating | — | 7,215 lb | 3,272 kg | 3.61 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Farmall 544 (7195 lb)
- John Deere 5100M (7191 lb)
- New Holland 4635 (7209 lb)
- New Holland L60 (7209 lb)
- Case IH Farmall 95C (7180 lb)
Closest comparable tractors
- J.I. Case 1210 (7100 lb)
- Case IH CX50 (7286 lb, 53 hp)
- John Deere 1641 (7409 lb)
- Case IH C50 (7595 lb, 53 hp)
- John Deere 5310 (6800 lb, 53 hp)
International Harvester 544 weight FAQ
How much does an International Harvester 544 weigh?
The International Harvester 544 weighs 7,195 lb (3,263 kg) using the published Diesel gear Operating figure. Across the published configurations on this page, weight ranges from 4,980 to 7,215 lb (2,258 to 3,272 kg).
How much does the hydrostatic International Harvester 544 weigh compared with the gear-drive version?
The published hydrostatic weight is 7,215 lb (3,273 kg), while gear-drive configurations are 7,195 lb (3,264 kg). The exact difference depends on drivetrain as well as transmission, so the configuration table above is the safest like-for-like reference.
What is the operating weight of the International Harvester 544 compared with shipping weight?
Published operating weight is 7,195–7,215 lb (3,264–3,273 kg), versus 4,980–5,220 lb (2,259–2,368 kg) for shipping weight. That is roughly 2,215 lb (44.5%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
Is the International Harvester 544 a heavy utility tractor?
Yes. The representative figure sits at about the 75th percentile, heavier than roughly 75% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 1,932 lb heavier than the peer-group average of 5,263 lb.
How wide is the International Harvester 544 for transport?
The maximum published tractor width is 71 in (5.9 ft). That is 31 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the International Harvester 544 weight-to-horsepower ratio?
Using the page’s representative 7,195 lb weight and 52 hp power figure, the tractor carries about 138.4 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
