Weight summary
The published Farmall 560 weight is 6,563–9,460 lb (2,976–4,291 kg). The primary figure used for comparisons is 6,563 lb (2,976 kg), listed as Operating — gas. The published configurations span 2,897 lb, a 44.1% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Farmall |
|---|---|
| Model | 560 |
| Category | Farm tractor |
| Model years | 1958 – 1963 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Operating | gas | 6,563 lb | 2,976 kg | 3.28 | — |
| Operating | diesel | 6,785 lb | 3,077 kg | 3.39 | — |
| Ballasted | — | 9,460 lb | 4,291 kg | 4.73 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- International Harvester 560 (6563 lb)
- Kubota M1-85 (6570 lb)
- International Harvester 634 (6546 lb)
- John Deere 70 (6538 lb)
- John Deere 2040 (6536 lb)
Closest comparable tractors
- John Deere 70 (6538 lb)
- Massey Ferguson 265 (6385 lb, 60 hp)
- John Deere 720 (6790 lb)
- John Deere 3010 (6500 lb, 55.09 hp)
- Allis Chalmers 6060 (6465 lb, 63.83 hp)
Farmall 560 weight FAQ
How much does a Farmall 560 weigh?
The Farmall 560 weighs 6,563 lb (2,976 kg) using the published Operating — gas figure. Across the published configurations on this page, weight ranges from 6,563 to 9,460 lb (2,976 to 4,291 kg).
What is the operating weight of the Farmall 560?
The published operating weight is 6,563–6,785 lb (2,977–3,078 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
How much does the Farmall 560 weigh with ballast?
The published ballasted weight is 9,460 lb (4,291 kg). That is up to 2,897 lb (44.1%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Farmall 560 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 15th percentile, lighter than roughly 85% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 7,443 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall 560 for transport?
The maximum published tractor width is 85 in (7.1 ft). That is 17 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall 560 weight-to-horsepower ratio?
Using the page’s representative 6,563 lb weight and 59.5 hp power figure, the tractor carries about 110.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
