The Cub Cadet Z-Force S60 mower blade part number found is 759-00036. The blade measurement captured is thickness 0.204 in (5 mm). The deck uses 3 blades.
Blade part #759-00036
Blade sizethickness 0.204 in (5 mm)
Blade count3 blades
Cub Cadet Z-Force S60 Mower Blade Size and Part Numbers
Mower blade part number
759-00036
Blade thickness
0.204 in (5 mm)
Number of blades
3 blades
Blade type
high-lift, mulching, standard, and 3-in-1
Blade Size Comparison Chart
Blade thickness comparison
This model
0.204 in
Average
0.188 in
Low
0.125 in
High
0.25 in
Cub Cadet Z-Force S60 Blade Notes
Blade note
The Cub Cadet Z-Force S60 blade listing captured here shows single blade part number 759-00036 and thickness 0.204 in (5 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the Cub Cadet Z-Force S60, the captured deck information is blade count 3 blades. Deck size matters because the same model family can use different blade kits
Blade type note
For the Cub Cadet Z-Force S60, blade type is listed as high-lift, mulching, standard, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
The blunt rule with the Cub Cadet Z-Force S60: part number and center hole beat guesswork. A blade can be the right length and still be wrong
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
