The Cub Cadet XT2 LX50 tractor rear tire size is 20×10-8.
Rear tire20×10-8
Tire pressure10 PSI, 14 PSI
Rim diameter20X10
Ballast35 gal
Cub Cadet XT2 LX50 Tire Size Details
Rear tire size
20×10-8
Rear tire construction
Flotation/implement tire
Rear section width
10 in
Rear rim diameter
8 in
Approx rear overall diameter
about 20 in
Tire pressure
10 PSI, 14 PSI
Loaded rear tire ballast / fluid capacity
35 gal
Tire Size Comparison Chart
Rear rim diameter comparison
This model
8 in
Average
10 in
Low
8 in
High
12 in
Benchmarks use typical low, average and high rim diameters for the lawn/garden tractor category, not scraped low/high outliers.
Cub Cadet XT2 LX50 Extra Tire Notes
Tire size note
The available tire-size data for the Cub Cadet XT2 LX50 includes rear tire size 20×10-8 (flotation/implement tire, 8 in rim)
Pressure note
For the Cub Cadet XT2 LX50 with rear 20×10-8 tires, the pressure values captured in the answer are 10 PSI, 14 PSI. Tire pressure is load-dependent, so use this as a reference value rather than a universal setting
Ballast note
For the Cub Cadet XT2 LX50 rear 20×10-8 tires, the ballast figure captured in the answer is 35 gal. Liquid ballast capacity can change by tire brand, fill percentage, wheel setup and ballast fluid type
Official information note
Mistakes do happen. Tire sizes can change by year, axle, wheel/rim option, tyre brand, tread type and local market. Please check the tire sidewall, operator manual and official www.cubcadet.com website for official information.
