Cub Cadet XT1 LT46 EFI Battery Size (U1) + Replacement Guide

Quick answer:

The Cub Cadet XT1 LT46 EFI tractor battery specs found are U1, 12 V (verify with operator manual), 230 CCA, 7.75 × 5.19 × 7.31 in.

Battery sizeU1
Voltage12 V (verify with operator manual)
CCA230 CCA
Case size7.75 × 5.19 × 7.31 in

Cub Cadet XT1 LT46 EFI Battery Specs

Battery size / group U1
Battery voltage 12 V (verify with operator manual)
Battery CCA 230 CCA
Battery dimensions 7.75 × 5.19 × 7.31 in
Battery location The battery on the Cub Cadet XT1 LT46 EFI tractor is located under the seat.

Battery Spec Benchmarks

CCA benchmark

This model

230 CCA

Average

350 CCA

Low

230 CCA

High

500 CCA

Voltage benchmark

This model

12 V

Average

12 V

Low

12 V

High

12 V

Case length benchmark

This model

7.75 in

Average

8.65 in

Low

7.75 in

High

10.25 in

Benchmarks are general reference ranges for lawn and garden tractor batteries.

Cub Cadet XT1 LT46 EFI Battery FAQ

Replacement battery recommendation For the Cub Cadet XT1 LT46 EFI tractor, use a battery that matches U1, 230 CCA or higher, case size around 7.75 × 5.19 × 7.31 in. Also match the terminal layout, hold-down style and battery tray clearance before buying. A 12 V battery is shown as a fallback, so verify the voltage in the operator manual before ordering.
Battery voltage shown The battery voltage shown for the Cub Cadet XT1 LT46 EFI tractor is 12 V (verify with operator manual). This was filled because the page had other battery specs but no clear voltage answer.
Battery group size found The battery group size found for the Cub Cadet XT1 LT46 EFI tractor is U1.
Battery CCA found The battery CCA figure found for the Cub Cadet XT1 LT46 EFI tractor is 230 CCA.
Battery location The battery on the Cub Cadet XT1 LT46 EFI tractor is located under the seat.
Battery replacement steps On the Cub Cadet XT1 LT46 EFI, treat the battery swap as a fitment job, not just a voltage match. Use a battery matching 12 V (verify with operator manual), U1, 230 CCA, then disconnect negative first, positive second. Install the replacement, secure the hold-down, reconnect positive first and finish with the negative cable.
Bad battery symptoms With a 12 V (verify with operator manual), U1, 230 CCA setup, the Cub Cadet XT1 LT46 EFI should crank cleanly. If it clicks, cranks slowly, loses charge overnight or needs boosting often, the battery is suspect.
Official information note

Mistakes do happen. Check the operator manual, service manual and official cubcadet.com website for official battery specifications before buying parts.