The Cub Cadet i1050 coolant capacity is listed as 0.93 gal (3.5 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity0.93 gal (3.5 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet i1050 Coolant Capacity
Cooling system capacity
0.93 gal (3.5 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
25 hp (18.6 kW)
Engine displacement
0.7 L (44.2 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.93 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
25 hp
Average
35 hp
Low
20 hp
High
60 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet i1050 Coolant and Engine Notes
Coolant capacity note
The Cub Cadet i1050 coolant spec points to 0.93 gal (3.5 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available
Coolant type note
The captured coolant type for the Cub Cadet i1050 is ethylene glycol-based coolant. Do not mix unknown coolant types unless the label and manual say they are compatible
Antifreeze mix note
The Cub Cadet i1050 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control
Engine context note
For the Cub Cadet i1050, the supporting engine specs are engine horsepower 25 hp (18.6 kW) and displacement 0.7 L (44.2 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note
For a coolant change on the Cub Cadet i1050, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Cub Cadet i1050 Coolant Capacity FAQ
How much coolant does the Cub Cadet i1050 take?
The main coolant amount captured for the Cub Cadet i1050 is 0.93 gal (3.5 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Cub Cadet i1050?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet i1050, the captured coolant type is ethylene glycol-based coolant.
What antifreeze mix does the Cub Cadet i1050 use?
The captured antifreeze mix for the Cub Cadet i1050 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Cub Cadet i1050 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Cub Cadet i1050 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet i1050, the supporting engine data is horsepower 25 hp (18.6 kW) and displacement 0.7 L (44.2 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
