Cub Cadet i1050 Belt Size

Quick answer:

The deck belt length found is 50 in (1,270 mm). The drive belt part number found is 754-04240. The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 50 in (1,270 mm)
Drive belt part #754-04240
Drive belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)

Cub Cadet i1050 Belt Size and Part Numbers

Mower deck belt length 50 in (1,270 mm)
Drive belt part number 754-04240
Drive belt length 95 in (2,413 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

50 in

Average

45 in

Low

25 in

High

70 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

Cub Cadet i1050 Belt Notes

Mower deck belt note The Cub Cadet i1050 deck belt measurement captured here is length 50 in (1,270 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note The Cub Cadet i1050 drive or transmission belt listing shows part number 754-04240, length 95 in (2,413 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note Before ordering a Cub Cadet i1050 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong

Cub Cadet i1050 Belt Size FAQ

Is a close belt length good enough for the Cub Cadet i1050 deck?

The deck belt length found is 50 in (1,270 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Should you buy the Cub Cadet i1050 belt by length only?

No. The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Which Cub Cadet i1050 belt needs more careful length matching?

The drive belt is longer here: deck 50 in (1,270 mm) versus drive 95 in (2,413 mm), about 45 in (1,143 mm) different. Do not cross-match them just because both are mower belts

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.