The Cub Cadet 514 tractor is 68 in long, 38 in wide, and 42 in tall.
Length68 in (5 ft 8 in) / 1,727.2 mm
Width38 in (3 ft 2 in) / 965.2 mm
Height42 in (3 ft 6 in) / 1,066.8 mm
Cub Cadet 514 Dimensions
Overall length
68 in (5 ft 8 in) / 1,727.2 mm
Overall width
38 in (3 ft 2 in) / 965.2 mm
Overall height
42 in (3 ft 6 in) / 1,066.8 mm
Rear tread width
36 in (3 ft 0 in) / 914.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
68 in
Average
105 in
Low
70 in
High
140 in
Overall width comparison
This model
38 in
Average
48 in
Low
34 in
High
66 in
Overall height comparison
This model
42 in
Average
68 in
Low
42 in
High
94 in
Cub Cadet 514 Extra Dimension Notes
Size class note
The Cub Cadet 514 falls into small compact tractor size from the available dimensions. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The Cub Cadet 514 can be treated as a tighter-storage tractor. With length 68 in (5 ft 8 in) / 1,727.2 mm, width 38 in (3 ft 2 in) / 965.2 mm, and height 42 in (3 ft 6 in) / 1,066.8 mm, check ROPS/cab height and loader length.
Fitment note
For access planning, the Cub Cadet 514 gives you length at 68 in (5 ft 8 in) / 1,727.2 mm, width at 38 in (3 ft 2 in) / 965.2 mm, and height at 42 in (3 ft 6 in) / 1,066.8 mm. Measure the opening, not just the indoor floor area.
Tread width note
The Cub Cadet 514 rear tread figure is 36 in (3 ft 0 in) / 914.4 mm. This is useful, but not the full wheel-stance picture.
Storage Tips
Compact size helps, but a loader or mower can still make the parked footprint much bigger.
Storage FAQ
What size garage will fit the tractor?
The tractor itself is 68 in long, 38 in wide, and 42 in tall. For storage, that means the opening should be closer to 7 ft high and 8 ft wide, with about 15 ft of usable depth.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 42 in height, 38 in width and 68 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 42 in for overhead clearance, 38 in for side clearance and 68 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 68 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official cubcadet.com website for official information.
