The Cub Cadet 1872 tractor is 42 in wide, with a 52 in wheelbase.
Width42 in (3 ft 6 in) / 1,066.8 mm
Wheelbase52 in (4 ft 4 in) / 1,320.8 mm
Cub Cadet 1872 Dimensions
Overall width
42 in (3 ft 6 in) / 1,066.8 mm
Wheelbase
52 in (4 ft 4 in) / 1,320.8 mm
Front tread width
42 in (3 ft 6 in) / 1,066.8 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
42 in
Average
165 in
Low
120 in
High
220 in
Wheelbase comparison
This model
52 in
Average
180 in
Low
130 in
High
260 in
Cub Cadet 1872 Extra Dimension Notes
Storage fit note
The Cub Cadet 1872 may be garage-friendly in some setups, but only after checking the actual door height and width. With width 42 in (3 ft 6 in) / 1,066.8 mm, measure before assuming fit.
Fitment note
The Cub Cadet 1872 footprint is defined by width at 42 in (3 ft 6 in) / 1,066.8 mm. For storage, the tight point is usually the door opening.
Wheelbase note
For the Cub Cadet 1872, wheelbase is 52 in (4 ft 4 in) / 1,320.8 mm. It is an important part of the size story.
Tread width note
The Cub Cadet 1872 gives front/rear tread specs of 42 in (3 ft 6 in) / 1,066.8 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. Use them when stance matters.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide, not the exact tractor dimensions.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 52 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
What size garage will fit the tractor?
The tractor itself is 42 in wide and 52 in wheelbase. For storage, that means the opening should be closer to the tractor height plus clearance high and 8 ft wide, with about the tractor length plus attachment room of usable depth.
What size door should I check?
Use 8 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 42 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 42 in wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 52 in wheelbase, about 10 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official cubcadet.com website for official information.
