The Cub Cadet 1211 tractor is 42 in wide, with a 44 in wheelbase.
Width42 in (3 ft 6 in) / 1,066.8 mm
Wheelbase44 in (3 ft 8 in) / 1,117.6 mm
Ground clearance6 in / 152.4 mm
Cub Cadet 1211 Dimensions
Overall width
42 in (3 ft 6 in) / 1,066.8 mm
Wheelbase
44 in (3 ft 8 in) / 1,117.6 mm
Ground clearance
6 in / 152.4 mm
Front tread width
42 in (3 ft 6 in) / 1,066.8 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
42 in
Average
165 in
Low
120 in
High
220 in
Wheelbase comparison
This model
44 in
Average
180 in
Low
130 in
High
260 in
Ground clearance comparison
This model
6 in
Average
28 in
Low
18 in
High
45 in
Cub Cadet 1211 Extra Dimension Notes
Storage fit note
The Cub Cadet 1211 is a realistic candidate for garage-style storage in the right setup. With width 42 in (3 ft 6 in) / 1,066.8 mm, measure the door, not just the room.
Fitment note
The Cub Cadet 1211 dimension row shows width at 42 in (3 ft 6 in) / 1,066.8 mm. Treat those as the headline measurements for storage, transport and property access.
Wheelbase note
Wheelbase is listed at 44 in (3 ft 8 in) / 1,117.6 mm for the Cub Cadet 1211. That is one of the main chassis-size measurements.
Ground clearance note
The Cub Cadet 1211 lists 6 in / 152.4 mm of ground clearance. That is useful for uneven ground and general underbody clearance.
Tread width note
The Cub Cadet 1211 tread-width listing is 42 in (3 ft 6 in) / 1,066.8 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. It can be more relevant than overall width for row work.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Measure the lowest overhead point, not the tallest part of the shed roof.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 44 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
A garage may work only when the clear opening is larger than height not captured high and 42 in wide, and the bay is longer than length not captured. For this machine, use 8 ft wide as the better rule.
What size door should I check?
Do not size the door to exactly height not captured by 42 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The Cub Cadet 1211’s 42 in width and 44 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official cubcadet.com website for official information.
