The Case SV280 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is low for Case skid-steers in this dataset.
ModelSV280
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Low
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 600 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Case SV280B skid steer loader is typically located under the floor panel near the engine compartment. For specific replacement specifications, it's best to consult the owner's manual or the manufacturer's website. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Case
Model
SV280
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SV280 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case operator’s manual.
?
What battery size fits the Case SV280?
Quick answer
The official battery group size for the Case SV280 Skid Steer Loader is Group 31. This heavy-duty battery is designed to provide reliable starting power, especially in cold weather conditions.
?
How many CCA does the Case SV280 need?
Quick answer
The recommended battery for the Case SV280 skid steer loader is a Group 24 battery with a minimum of 600 CCA (Cold Cranking Amps). It's important to ensure that the battery fits properly and meets the required specifications for optimal performance.
?
What voltage battery does the Case SV280 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Case SV280?
Quick answer
Family-match guidance: The battery on the Case SV280B skid steer loader is typically located under the floor panel near the engine compartment. For specific replacement specifications, it's best to consult the owner's manual or the manufacturer's website. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Case SV280?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 600 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
