The Bobcat S 185 H ACS skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 185 H ACS
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The Bobcat S185 H ACS skid steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) according to owner reports, and a quality automotive battery of the same size can work if properly secured and maintained on a float charger.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S185 H ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the Bobcat website.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 185 H ACS
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Bobcat S185 H ACS skid steer loader include difficulty starting the engine, dimming lights, and electrical issues such as malfunctioning controls. The S185 typically requires a Group 24 battery with 600 CCA for optimal performance.
?
What battery size fits the Bobcat S 185 H ACS?
Quick answer
The Bobcat S185 skid steer loader requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA) for optimal performance. For replacement, you can also consider a Group 27 battery for additional power if it fits in the compartment.
?
How many CCA does the Bobcat S 185 H ACS need?
Quick answer
The Bobcat S185 skid-steer loader requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA) for optimal performance. You can find suitable replacement batteries at Bobcat dealers or other automotive battery suppliers.
?
What voltage battery does the Bobcat S 185 H ACS use?
Quick answer
The Bobcat S185 H ACS skid steer loader uses a 12-volt battery. For replacement, it typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA).
?
Where is the battery on the Bobcat S 185 H ACS?
Quick answer
The battery on the Bobcat S185 H ACS skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the Bobcat website.
?
What is the best replacement battery for the Bobcat S 185 H ACS?
Quick answer
The Bobcat S185 H ACS skid steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) according to owner reports, and a quality automotive battery of the same size can work if properly secured and maintained on a float charger.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
