The Case IH Puma 200 tractor engine horsepower is 200 hp | 149.1 kW, PTO horsepower is 165 hp | 123.0 kW, and the drawbar horsepower is 155.2 hp | 115.7 kW.
Case IH Puma 200 Horsepower Specs
| Engine gross horsepower | 200 hp | 149.1 kW |
|---|---|
| PTO horsepower claimed | 165 hp | 123.0 kW |
| PTO horsepower tested | 198.7 hp | 148.2 kW |
| Drawbar horsepower tested | 155.2 hp | 115.7 kW |
Case IH Puma 200 Useful Horsepower Calculations
| PTO-to-engine power transfer | 82.5% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 77.6% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 94.1% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 2.5 ci per PTO hp |
| PTO horsepower per liter | 24.6 PTO hp per L |
| Engine size per engine horsepower | 2.1 ci per engine hp |
| Engine horsepower per liter | 29.9 engine hp per L |
| Fuel tank per PTO horsepower | 0.6 gal per PTO hp |
| Rated speed per PTO horsepower | 13.3 rpm per PTO hp |
Case IH Puma 200 Engine Specs
| Engine model | year |
|---|---|
| Engine type | turbocharged diesel |
| Displacement | 410.6 ci | 6.7 L |
| Bore and stroke | 4.094×5.197 inches | 104 x 132 mm |
| Emissions | Interim Tier 4 |
| Rated RPM | 2200 |
Case IH Puma 200 Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 104 gal | 393.6 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
Case IH Puma 200 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Puma 200 Horsepower FAQ
How much horsepower does the Case IH Puma 200 have?
The listed engine output is 200 hp, close to the 210 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 200 hp as the main engine number.
How much PTO horsepower does the Case IH Puma 200 have?
The listed PTO output is 165 hp, close to the 175 hp benchmark average. Use 165 PTO hp as the practical implement-sizing number.
How much drawbar horsepower does the Case IH Puma 200 have?
The listed drawbar output is 155.2 hp, close to the 150 hp benchmark average. It gives a realistic pulling-power figure of about 155.2 hp.
How much engine power reaches the PTO on the Case IH Puma 200?
The PTO-to-engine transfer works out to 82.5%, from 200 engine hp to 165 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Puma 200 for pulling work?
The drawbar-to-engine transfer is about 77.6%, from 200 engine hp to 155.2 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH Puma 200 better judged by PTO hp or drawbar hp?
The drawbar output is about 94.1% of PTO output, comparing 155.2 drawbar hp with 165 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Puma 200 engine?
The engine displacement is 410.6 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH Puma 200 engine stressed for its PTO horsepower?
The engine has about 2.5 cubic inches per PTO hp, using 410.6 ci and 165 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Puma 200 make?
The output density is about 24.6 PTO hp per liter, using 165 PTO hp and 6.7 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
