Case IH Puma 155 Horsepower & PTO HP

Quick answer:

The Case IH Puma 155 tractor engine horsepower is 155 hp | 115.6 kW, PTO horsepower is 135 hp | 100.7 kW, and the drawbar horsepower is 103.5 hp | 77.2 kW.

Engine HP155 hp | 115.6 kW
PTO HP135 hp | 100.7 kW
Drawbar HP103.5 hp | 77.2 kW
PTO Transfer87.1%
Displacement411 ci | 6.7 L

Case IH Puma 155 Horsepower Specs

Engine gross horsepower 155 hp | 115.6 kW
PTO horsepower claimed 135 hp | 100.7 kW
PTO horsepower tested 149.7 hp | 111.6 kW
Drawbar horsepower tested 103.5 hp | 77.2 kW

Case IH Puma 155 Useful Horsepower Calculations

PTO-to-engine power transfer 87.1% of engine hp reaches the PTO
Drawbar-to-engine power transfer 66.8% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 76.7% drawbar hp vs PTO hp
Engine size per PTO horsepower 3 ci per PTO hp
PTO horsepower per liter 20.1 PTO hp per L
Engine size per engine horsepower 2.7 ci per engine hp
Engine horsepower per liter 23.1 engine hp per L
Fuel tank per PTO horsepower 0.6 gal per PTO hp
Rated speed per PTO horsepower 16.3 rpm per PTO hp

Case IH Puma 155 Engine Specs

Engine type turbocharged air-to-air aftercooled diesel
Displacement 411 ci | 6.7 L
Bore and stroke 4.094×5.197 inches | 104 x 132 mm
Compression 17.5:1
Emissions Tier 3
Rated RPM 2200

Case IH Puma 155 Fuel, Cooling, Starting & Service Specs

Fuel capacity Prior to 2010:79 gal | 299.0 L
Starter volts 12
Battery volts 12

Case IH Puma 155 Horsepower Comparison Charts

Engine horsepower comparison

This model

155 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

135 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

103.5 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

411 ci

Average

520 ci

Low

360 ci

High

750 ci

Rated RPM comparison

This model

2,200 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

3 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH Puma 155 Horsepower FAQ

How much horsepower does the Case IH Puma 155 have?

The listed engine output is 155 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 155 hp.

How much PTO horsepower does the Case IH Puma 155 have?

The listed PTO output is 135 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 135 hp rather than using a bigger engine-horsepower number.

How much drawbar horsepower does the Case IH Puma 155 have?

The listed drawbar output is 103.5 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 103.5 hp at the drawbar before soil, ballast and tire limits are considered.

How much engine power reaches the PTO on the Case IH Puma 155?

The PTO-to-engine transfer works out to 87.1%, from 155 engine hp to 135 PTO hp. That is a normal usable range for judging PTO implement fit.

How efficient is the Case IH Puma 155 for pulling work?

The drawbar-to-engine transfer is about 66.8%, from 155 engine hp to 103.5 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the Case IH Puma 155 better judged by PTO hp or drawbar hp?

The drawbar output is about 76.7% of PTO output, comparing 103.5 drawbar hp with 135 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the Case IH Puma 155 engine?

The engine displacement is 411 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.

Is the Case IH Puma 155 engine stressed for its PTO horsepower?

The engine has about 3 cubic inches per PTO hp, using 411 ci and 135 PTO hp. That is close to the normal benchmark for this category.

How much PTO horsepower per liter does the Case IH Puma 155 make?

The output density is about 20.1 PTO hp per liter, using 135 PTO hp and 6.7 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.