The Case IH PJ55 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10.41 gpm | 39.4 lpm, and valves/remotes are listed as 3 * Optional. | 3.
Case IH PJ55 Hydraulic Capacity & Flow Specs
| Pump flow | 10.41 gpm | 39.4 lpm |
|---|---|
| Steering flow | 5.2 gpm | 19.7 lpm |
| Hydraulic valves | 3 * Optional. | 3 |
Case IH PJ55 Hitch, Remote & Lift Specs
| Rear hitch type | I |
|---|---|
| Rear hitch control | top-link draft sensing |
| Rear lift at ends | 5291 lbs | 2399 kg |
Case IH PJ55 Useful Hydraulic Calculations
| Steering flow vs pump flow | 50% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 508.3 lb per gpm |
Case IH PJ55 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH PJ55 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|
Case IH PJ55 Hydraulic Capacity FAQ
Why is the Case IH PJ55 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH PJ55, but pump flow is 10.41 gpm | 39.4 lpm and lift is listed as 5291 lbs | 2399 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH PJ55 hydraulics feel fast or slow?
The useful speed clue is 10.41 gpm | 39.4 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH PJ55?
On the Case IH PJ55, 10.41 gpm | 39.4 lpm pump flow points to slower loader and cylinder movement and 5,291 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH PJ55?
For implement matching, the useful checks are 10.4 gpm flow, 5,291 lb listed lift, 3 * Optional. | 3 remote/valve listing, and I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH PJ55 rear lift capacity strong?
The listed lift figure is 5291 lbs | 2399 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH PJ55 hydraulic remotes enough?
The Case IH PJ55 remote/valve listing is 3 * Optional. | 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH PJ55 hydraulics handle long hydraulic jobs?
The useful heat clues are 10.4 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH PJ55 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is top-link draft sensing, and listed lift is 5291 lbs | 2399 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Case IH PJ55 hydraulics?
For service planning, flow is listed at 10.4 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
