The Case IH MX270 Magnum tractor hydraulic capacity is 45.5 gal | 172.2 L, pump flow is 30 gpm | 113.6 lpm, and hydraulic pressure is 2500 psi | 172.4 bar.
Hydraulic Capacity45.5 gal | 172.2 L
Hydraulic Flow30 gpm | 113.6 lpm
Pressure2500 psi | 172.4 bar
Hydraulic Typeclosed center PFC
Valves / Remotes3 to 5
Lift Capacity13000 lbs | 5896 kg
Case IH MX270 Magnum Hydraulic Capacity & Flow Specs
Hydraulic type
closed center PFC
Hydraulic capacity
45.5 gal | 172.2 L
Hydraulic pressure
2500 psi | 172.4 bar
Pump flow
30 gpm | 113.6 lpm
SCV flow
27 gpm | 102.2 lpm
Hydraulic valves
3 to 5
Case IH MX270 Magnum Hitch, Remote & Lift Specs
Rear hitch type
III/IIIN
Rear hitch control
position and draft control
Rear lift
13000 lbs | 5896 kg
Case IH MX270 Magnum Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
0.7 gpm per gal
Hydraulic tank turnover estimate
about 1.5 minutes at rated pump flow
SCV flow vs pump flow
90% of listed pump flow
Rear lift per pump gpm
433.3 lb per gpm
Rear lift per hydraulic gallon
285.7 lb per gal
Estimated hydraulic horsepower
about 43.8 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
172.2 L capacity with 30 gpm pump flow
Case IH MX270 Magnum Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
45.5 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
30 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,500 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
13,000 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MX270 Magnum Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
hydraulic wet disc brakes
Differential lock
electro-hydraulic rear
Case IH MX270 Magnum Hydraulic Capacity FAQ
Is the Case IH MX270 Magnum hydraulic capacity big or small for its size?
The Case IH MX270 Magnum lists 45.5 gal | 172.2 L of hydraulic capacity, which is close to the 42 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH MX270 Magnum hydraulics feel fast or slow?
The useful speed clue is 30 gpm | 113.6 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH MX270 Magnum hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Case IH MX270 Magnum?
On the Case IH MX270 Magnum, 30 gpm | 113.6 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 13,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MX270 Magnum?
For implement matching, the useful checks are 30 gpm flow, 2,500 psi pressure, 13,000 lb listed lift, and 3 to 5 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MX270 Magnum rear lift capacity strong?
The listed lift figure is 13000 lbs | 5896 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH MX270 Magnum hydraulic remotes enough?
The Case IH MX270 Magnum remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MX270 Magnum hydraulics handle long hydraulic jobs?
The useful heat clues are 45.5 gal of hydraulic capacity, 30 gpm flow, 2,500 psi pressure, and about 43.8 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the Case IH MX270 Magnum make on paper?
Using 2,500 psi and 30 gpm, the rough pressure-flow estimate is about 43.8 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH MX270 Magnum hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN, hitch control is position and draft control, and listed lift is 13000 lbs | 5896 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
