The Case IH Maxxum 100 tractor engine horsepower is 99 hp | 73.8 kW.
Engine HP99 hp | 73.8 kW
Torque302 lb-ft | 409.5 Nm
Displacement273.7 ci | 4.5 L
Case IH Maxxum 100 Horsepower Specs
Engine gross horsepower
99 hp | 73.8 kW
Case IH Maxxum 100 Useful Horsepower Calculations
Engine size per engine horsepower
2.8 ci per engine hp
Engine horsepower per liter
22 engine hp per L
Case IH Maxxum 100 Engine Specs
Engine type
turbocharged diesel
Displacement
273.7 ci | 4.5 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Compression
17.5:1
Emissions
Stage 3A
Rated RPM
2200
Torque
302 lb-ft | 409.5 Nm
Torque RPM
1400
Case IH Maxxum 100 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Firing order
1-3-4-2
Case IH Maxxum 100 Horsepower Comparison Charts
Engine horsepower comparison
This model
99 hp
Average
80 hp
Low
45 hp
High
120 hp
Displacement comparison
This model
273.7 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
302 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Maxxum 100 Horsepower FAQ
How much horsepower does the Case IH Maxxum 100 have?
The listed engine output is 99 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 99 hp.
How big is the Case IH Maxxum 100 engine?
The engine displacement is 273.7 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
How much torque does the Case IH Maxxum 100 have?
The listed torque is 302 lb-ft, above the 240 lb-ft benchmark average. The 302 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
What rpm is the Case IH Maxxum 100 rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
